Digital Interface Node
The Digital Interface Node is a robust IP66/1P67 rated digital data logger that transforms your data collection from manual to automated sampling. This wireless digital data logger is compatible with a large variety of sensors that carry a digital output and enables a simple connection to the Senceive back-end & front-end platforms. Interact and manage your data online and change reporting times and thresholds remotely.
The Digital Interface Node is compatible with InfraGuard™. Choose this responsive reporting option when you need dynamic reporting. This means your sensors can be self-managing tools that react to changing site conditions. Features include accelerated sampling, triggered site photos and escalated alerting, with near real-time notifications.
The Digital Interface Node is ideal for many applications including:
- Understanding diaphragm wall movements when installing in-place inclinometers in large excavation and construction projects.
- Managing your geotechnical assets in mining, railways & highway using piezometers, extensometers and inclinometers.
- Environmental applications such as continuous logging of weather station data including precipitation, wind strength and temperature.
The Digital Interface Node is compatible with a wide variety of digital structural, environmental, and geotechnical sensors including:
- Inclinometers
- Extensometers
- Piezometers
- Load/Pressure Cells
- Hydrostatic Pressure cells
- Temperature
- Wind Velocity
- Vibration
- Water Level
- Hydrostatic Level Cells
- Stress/Strain
- Crack Movement
- Versatile mounting options
- Compatible with FlatMesh™ and GeoWAN™ wireless communications platforms
- Waterproof to IP66 / IP67
- Low power, long battery life with changeable batteries
- Automatic power sharing and switchover between battery and external DC supply
- Firmware is remotely upgradeable over the air via the gateway, reducing costly site visits (FlatMesh™)
- Extremely low noise performance
- NFC compatibility, enabling on the spot adjustments to the node
- “Sleep mode” functionality
- Power sensors requiring up to 20 Watts
- Configurable output voltage enabling longer sensor chains
- Compatible with our InfraGuard™ responsive reporting option for networked and dynamic reporting (FlatMesh™)
- Hardware support for these connection protocols: RS232, RS422, RS485, SDI-12, MODBUS and CAN
- GeoSense
- GeoKon
- Sisgeo
- Osprey
- Vaisala
FlatMesh Digital Interface Node PDS-F3N1-DIN
GeoWAN Digital Interface Node PDS-L3N1-DIN
Physical Specifications
Parameter | Value |
---|---|
Dimensions excluding antenna and bracket | 246 x 137 x 88 mm |
Dimensions including antenna and bracket | 246 x 303 x 106 mm |
Total Mass |
836 g without batteries 1090 g with 2 batteries |
Housing Material | Polycarbonate |
Protection | IP66 and IP67 |
Mounting Options | Pole mount, wall mount |
Operating Temperature Range | -40°C to +85°C |
Sensor Interface
Parameter | Value |
---|---|
Connector | M12 Female 8-pole A-coded Screw clamp |
Output Voltage (DC) | 0.8 V to 22 V |
Output Current | Up to 2A |
Digital Interfaces |
RS232 (1): With software-controlled termination and biasing |
For more information on the Digital Interface Node - our digital logger, call +44 (0)800 033 7731 or email info@senceive.com