Sensor Interface / PT100 RTD Sensor Node
PT100 RTD Sensor Node
The PT100 RTD Sensor Node enables precise temperature monitoring using a variety of sensors.
It uses the integrated radio transceiver to report its measurements through Senceive’s wireless communications network to a Gateway.
Typical temperature monitoring applications:
- Steel structures
- Rail, for critical rail temperature alerting
- Concrete structures, including during curing
- Heating, ventilation, and air conditioning (HVAC) systems
Features
Specifications
Data Sheets
Case Studies
Get in Touch
Features
- Waterproof, robust connectors for simple installation
- Accuracy of 0.1°C
- Can have -IX triaxial tilt sensor integrated for combined tilt and temperature sensing in one unit
- Integrated long life battery
- 12-15 year battery life
- Versatile mounting options
- Waterproof to IP66 / IP67 / IP68
- Firmware is remotely upgradeable over the air via the gateway reducing costly site visits (FlatMesh)
- Easily deployed
Specifications
FlatMesh PT100 RTD Sensor Node - FM3N-RTD
GeoWAN PT100 RTD Sensor Node - LR3N-RTD
FlatMesh Physical Specifications
| Parameter | Value |
|---|---|
| Dimensions excluding antenna and vent | 90 x 90 x 60 mm |
| Dimensions excluding antenna | 90 x 96 x 60 mm |
| Total Mass | 0.57kg |
| Housing Material | Die cast aluminium |
| Protection (BS EN 60529: 1992 + A2: 2013) |
IP66 / IP67 IP68 at 1m for 24 hours |
| Mounting Options | M4 blind holes in side ¼” UNF holes in bottom |
| Operating Temperature Range | -40°C to +85°C |
RTD Interface
| Parameter | Value |
|---|---|
| Connector | M12 Female 5-pole A-coded Screw-in Type |
| Accuracy | ± 0.1°C |
| Resolution | 0.01°C |
| Stimulus Type | Constant Current |
Tilt Sensor (-IX variant only)
| Parameter | Value |
|---|---|
| Resolution | 0.0001° (0.00175 mm/m) |
| Repeatability | ±0.0005° (0.0087 mm/m) |
| Range | ±90° |
Data Sheets
Case Studies
Get in Touch
For more information on our PT100 RTD Sensor Node, call +44 (0) 207 731 8269 or email [email protected]
Senceive