Tilt Sensors / Triaxial Tilt Sensor Node
Triaxial Tilt Sensor Node
The Triaxial Tilt Sensor Node is an extremely precise and exceptionally stable three axis wireless tilt meter for use in a variety of sectors.
Variable reporting rates, a robust design and up to a 15 year battery life make this wireless 3 axis tiltmeter suitable for many environments and applications. The wireless tiltmeter nodes transmit precise readings from the site via one of our wireless communication platforms (FlatMesh or GeoWAN) via a Gateway. Visualise and interact with your data online using the Senceive WebMonitor platform or third party software.
This wireless 3 axis tiltmeter has been successfully used in many applications, including those measuring:
- Tunnel distortion
- Tunnel heave/settlement
- Embankment slippage
- Structural movement
- Rail track heave/settlement
- Rail trackbed cant and twist
- Integrated triaxial wireless tilt monitor sensor
- Extremely low noise performance
- Resolution of 0.0001° (0.0018 mm/m) and repeatability of ±0.0005° (±0.009 mm/m)
- Integrated long-life battery
- 12 -15 year battery life, including when acting as a relay node within the mesh communications network
- Integrated temperature sensor
- Versatile mounting options
- Waterproof to IP66 / IP67 / IP68
- Firmware is remotely upgradeable over the air via the gateway, reducing costly site visits (FlatMesh)
FlatMesh Triaxial Tilt Node - FM3N-IX
GeoWAN Triaxial Tilt Node - LR3N-IX
Physical Specifications
| Parameter | Value |
|---|---|
| Dimensions excluding antenna |
90 x 90 x 60 mm 90 x 96 x 60 mm (including vent) |
| Total Mass | 0.6 kg approx |
| Housing Material | Die cast aluminium |
| Protection (BS EN 60529: 1992 + A2: 2013) |
IP66 / IP67 IP68 at 1 m for 24 hours |
| Mounting Options |
1/4” UNF holes in bottom, M4 blind holes in sidePlates and brackets available for magnetic fixing, trackbed, stake and pole mounting, and many other applica-tions1/4" UNF holes in bottom. M4 blind holes in side. Plates and brackets available for magnetic fixing, trackbed, stake and pole mounting & many other applications |
| Operating Temperature Range |
-40°C to +85°C Sensor accuracy is reduced slightly at temperatures below -25°CSensor accuracy is reduced slightly at temperatures below -25°C |
Tilt Sensor Specifications
| Parameter | Value |
|---|---|
| Resolution | 0.0001° (0.00175 mm/m) |
|
Repeatability (-IX variant) Repeatability (-IXH variant) Range |
±0.0005° (±0.0087 mm/m) ±0.0025° (±0.0436 mm/m) ±90° |
•Tested to conformity with all the essential requirements of the Radio Equipment Directive2014/53/EU and RoHS Directive 2011/65/EU•FCC Grant of Equipment Authorization: FCC ID 2AMFBFM3N•RCM stralia and New Zealand)
For more information on our Triaxial Tilt Sensor Node, call +44 (0)800 033 7731 or email info@senceive.com
